Part Number Hot Search : 
NTE4007 01VXC 311406 MA101 74VHC1G AON6516 74LVT2 95T10
Product Description
Full Text Search
 

To Download STS4DPFS2LS Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 STS4DPFS2LS
P-CHANNEL 20V - 0.06 - 4A SO-8 STripFETTM MOSFET PLUS SCHOTTKY RECTIFIER
MAIN PRODUCT CHARACTERISTICS MOSFET VDSS 20 V SCHOTTKY IF(AV) 3A RDS(on) < 0.07 VRRM 40 V ID 4A VF(MAX) 0.44 V
SO-8
DESCRIPTION This product associates the latest low voltage STripFETTM in p-channel version to a low drop Schottky diode. Such configuration is extremely versatile in implementing, a large variety of DC-DC converters for printers, portable equipment, and cellular phones.
INTERNAL SCHEMATIC DIAGRAM
MOSFET ABSOLUTE MAXIMUM RATINGS
Symbol VDS VDGR VGS ID ID IDM (q) PTOT EAS (1) Parameter Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuos) at TC = 25C Drain Current (continuos) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Single Pulse Avalanche Energy Value 20 20 20 4 3.4 16 2 20 Unit V V V A A A W mJ
SCHOTTKY ABSOLUTE MAXIMUM RATINGS
Symbol VRRM IF(RMS) IF(AV) IFSM IRRM dv/dt Parameter Repetitive Peak Reverse Voltage RMS Forward Current Average Forward Current Surge Non Repetitive Forward Current Repetitive Peak Reverse Current Critical Rate Of Rise Of Reverse Voltage TL = 120C = 0.5 tp = 10 ms Sinusoidal tp = 2 s F = 1 kHz Value 40 10 3 75 1 10000 Unit V A A A A V/s
(*)Pulse width limited by safe operating area (1) Starting Tj = 25C, I D = 2.5 A, VDD = 20 V
Note: For the P-CHANNEL MOSFET actual polarity of Voltages and current has to be reversed
February 2001
1/8
STS4DPFS2LS
THERMAL DATA
Rthj-amb Rthj-amb Tstg Tl (*)Thermal Resistance Junction-ambient MOSFET (*)Thermal Resistance Junction-ambient SCHOTTKY Storage Temperature Range Junction Temperature
(*) Mounted on FR-4 board (Steady State)
62.5 100 -55 to 150 150
C/W C/W C C
MOSFET ELECTRICAL CHARACTERISTICS (TCASE = 25 C UNLESS OTHERWISE SPECIFIED) OFF
Symbol V(BR)DSS IDSS IGSS Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Test Conditions ID = 250 A, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 C VGS = 20 V Min. 20 1 10 100 Typ. Max. Unit V A A nA
ON (1)
Symbol VGS(th) RDS(on) ID(on) Parameter Gate Threshold Voltage Static Drain-source On Resistance On State Drain Current Test Conditions VDS = VGS, ID = 250A VGS = 10V, ID = 2.5 A VGS = 4.5V, ID = 2.5 A VDS > ID(on) x RDS(on)max, VGS = 10V 16 Min. 1 Typ. 1.6 0.06 0.07 Max. 2.5 0.07 0.085 A Unit V
DYNAMIC
Symbol gfs (1) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Test Conditions VDS > ID(on) x RDS(on)max, ID = 2 A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 5 1350 490 130 Max. Unit S pF pF pF
2/8
STS4DPFS2LS
ELECTRICAL CHARACTERISTICS (CONTINUED) SWITCHING ON
Symbol td(on) tr Qg Qgs Qgd Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDD = 15V, ID = 3A RG = 4.7 VGS = 10V (see test circuit, Figure 3) VDD = 24V, ID = 6A, VGS = 4.5 V Min. Typ. 25 35 12.5 5 3 16 Max. Unit ns ns nC nC nC
SWITCHING OFF
Symbol td(off) tf tr(Voff) tf tc Parameter Turn-off Delay Time Fall Time Off-voltage Rise Time Fall Time Cross-over Time Test Conditions VDD = 15 V, ID = 2A, RG = 4.7, VGS = 4.5 V (see test circuit, Figure 3) Vclamp = 24 V, ID = 6 A, RG = 4.7, VGS = 4.5 V (see test circuit, Figure 5) Min. Typ. 125 30 83 40 75 Max. Unit ns ns ns ns ns
SOURCE DRAIN DIODE
Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4 A, VGS = 0 ISD = 4 A, di/dt = 100A/s, VDD = 15 V, Tj = 150C (see test circuit, Figure 5) 45 36 1.6 Test Conditions Min. Typ. Max. 4 16 1.2 Unit A A V ns nC A
Note: 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Pulse width limited by safe operating area.
SCHOTTCKY STATIC ELETTRICAL CHARACTERISTICS
Symbol IR(*) VF(*) Parameter Reversed Leakage Current Forward Voltage Drop Test Conditions TJ = 25 C , VR = 30 V TJ = 125 C , VR = 30 V TJ = TJ = TJ = TJ = TJ = TJ = 25 C , IF = 1 A 125 C , IF = 1 A 25 C , IF = 2 A 125 C , IF = 2 A 25 C , IF = 3 A 125 C , IF = 3 A Min. Typ. 14 8 0.37 0.28 0.41 0.34 0.4 Max. 50 18 0.42 0.32 0.46 0.39 0.5 0.44 Unit A mA V V V V V V
3/8
STS4DPFS2LS
Safe Operating Area Thermal Impedance
Output Characteristics
Transfer Characteristics
Transconductance
Static Drain-source On Resistance
4/8
STS4DPFS2LS
Gate Charge vs Gate-source Voltage Capacitance Variations
Normalized Gate Threshold Voltage vs Temp.
Normalized On Resistance vs Temperature
Source-drain Diode Forward Characteristics
5/8
STS4DPFS2LS
Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform
Fig. 3: Switching Times Test Circuits For Resistive Load
Fig. 4: Gate Charge test Circuit
Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times
6/8
STS4DPFS2LS
SO-8 MECHANICAL DATA
DIM. MIN. A a1 a2 a3 b b1 C c1 D E e e3 F L M S 3.8 0.4 4.8 5.8 1.27 3.81 4.0 1.27 0.6 8 (max.) 0.14 0.015 5.0 6.2 0.65 0.35 0.19 0.25 0.1 mm TYP. MAX. 1.75 0.25 1.65 0.85 0.48 0.25 0.5 45 (typ.) 0.188 0.228 0.050 0.150 0.157 0.050 0.023 0.196 0.244 0.025 0.013 0.007 0.010 0.003 MIN. inch TYP. MAX. 0.068 0.009 0.064 0.033 0.018 0.010 0.019
0016023
7/8
STS4DPFS2LS
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 2000 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com
8/8


▲Up To Search▲   

 
Price & Availability of STS4DPFS2LS

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X